Cables & Adapters
STARGATE-TO-PC ADAPTER KIT (SG-PC-KIT)
Connects STARGATE's COM1 serial port to the local pc serial com port. DB9F-to-RJ11 adapter with 7-foot, 6-conductor data cable. See pinout.pdf application note for details.
STARGATE-TO-JANDY AQUALINK ADAPTER KIT (SG-JAN-KIT)
Connects STARGATE's COM2 or COM3 to a Jandy AquaLink Serial RS Pool Controller. Includes DB9M-to-RJ11 adapter with 7-foot, 6-conductor data cable. See jandy.pdf application note for details.
STARGATE-TO-UPB ADAPTER KIT (SG-UPB-KIT)
Connects STARGATE's COM2 or COM3 to a UPB powerline interface module (PIM). Includes DB9M-to-RJ11 adapter with 7-foot, 6-conductor data cable.
For older Stargates, use part number 001-00729 adapter kit with external 12vdc lead. See upb.pdf application note for details.
STARGATE-TO-UPB ADAPTER KIT (001-00729)
For older STARGATES.
Connects STARGATE's COM2 or COM3 to a UPB powerline interface module (PIM). Includes DB9M-to-RJ11 adapter and 7-foot, 6-conductor data cable with an external 12vdc lead connected to pin 4 of the DB9M. See upb.pdf application note for details.
STARGATE-TO-MODEM ADAPTER KIT (SG-MOD-KIT)
Connects STARGATE's COM2 or COM3 to an external modem. Includes DB25M-to-RJ11 "NULL" adapter (pins 2 & 3 reversed) with 7-foot, 6-conductor data cable.
USB-TO-SERIAL ADAPTER KIT (SW-1301)
If your computer is not equipped with a serial port, this USB-To-Serial adpater cable from Sewell Direct lets you connect your STARGATE (SG-IP, SG-Lite, SG-1), TimeCommander, TimeCommander-Plus, or CommStar-IP Controller to a USB port.
NOTE: Be sure to use the latest FWTOOL (Version 2.40) for downloading firmware changes via the USB-To-Serial adapter.
WEBX-TO-SERIAL RABBIT PROGRAMMING CABLE (20-101-0513)
Order direct from the manufacturer. Connects the 10 pin program port on a Web Xpander board to a computer serial port. Used for downloading firmware instructions to the Web Xpander when an ethernet connection cannot be used. Order the 2mm connector size (P/N 20-101-0513).
